Maximum output voltage（KV）：1,5,10,20,30,40,60,70,80,100,120,140
1. Overvoltage, output short circuit and arc fault protection
2. Constant voltage, constant current, and constant power modes are optional
3. The output voltage is from 0 to ±70KV
4. High stability, low ripple
5. Local or remote control
6. Safe interlock function is optional
7. RS-232, RS422 computer control
8. OEM customized available
9. High-voltage dual power supply, can output positive and negative high voltage, can also output two positive high voltage or two negative high voltage.
Wisman's new MRB series are a family of high voltage 100-280 Watt modules that provide output voltages ranging from 1kV to 140kV.Bipolar outputs in a single unit. The MRB Series is the result of Wisman's exceptional high voltage packaging and surface mount fabrication techniques coupled with proprietary encapsulation technology producing this ultra-compact module. Wisman's MRB Series of 100-280 watt high voltage power supplies are based on a proprietary resonant fly back power conversion topology that provides over 80% efficiency. Offering tight regulation, high stability and low ripple, the MRB provides users local and remote analog control to set voltage and current, both voltage and current regulation with automatic crossover.The robust design of MRB Series along with comprehensive arc and short circuit protection allow operation in the most demanding environments. An optional RS-422, RS-232 interface is available.
High voltage testing,
Electron Beam/Ion Beam,
General laboratory usage,
High voltage bias,
AC filament power supply
USB computer USB2.0 measurement and control
Input: DC,AC. Maximum current is 3.25A
Output: ±10KV, ±20KV, ±30KV, ±40KV, ±60KV, ±70KV, the highest voltage output is optional, 0V to the highest voltage is adjustable.
Voltage control: inside the power supply: the multi-turn potentiometer can set the output voltage between 0V and the highest voltage.
External remote control: external 0 to 10V control signal can adjust the output from 0V to the highest output voltage.
Inside the power supply: The multi-turn potentiometer that comes with the power supply can set the electron beam current from 0A to the highest current.
External remote control: The external 0 to 10V control signal can set the electron beam current from 0A to the highest current.
Relative load: 0.01% (no load to rated load)
Relative input: ±0.01% (input voltage change is ±10%)
Current adjustment rate:
Relative load: 0.01% (no load to rated load)
Relative input: ±0.01% (input voltage change ±10%).
Ripple voltage: the peak ripple voltage under the premise of outputting the rated voltage value is 0.1% rms of the highest output voltage
Ambient temperature: 0 to +40°C.
Temperature coefficient: 25PPM/℃
Stability: less than 25PPM every 2 hours after turning on for half an hour.
Voltage and current indication: 0 to +10V, accuracy is 1% under rated output conditions.
Dimensions: length 254mm, width 100mm, height 160mm
High-voltage output connector: the recessed insulating conduit and the high-voltage cable are connected by a metal connector with a diameter of 16mm.
Input and output connector: DB9, contains control and display signals.
Remote control of output voltage and current:
An external potentiometer can be used to remotely control the output voltage and current using the 10V voltage reference inside the power supply.
Remote voltage indication: JP4 contains 0 to 10V voltage and current indication signals, which can be connected to various digital or pointer meters.
For information concerning our high voltage products, please call at 086-029-33693480 or visit our website www.wismanhv.com
Wisman advances medical care, industrial processes, quality control, scientific research, security and telecommunications by providing innovative high voltage power supplies including micro-modules high voltage power supply, modules high voltage power supply, X-ray generator, rack mount voltage power supply, special customized high voltage power supply, high voltage accessories, etc. that enable equipment manufacturers to improve their systems’ performance, reliability, cost and bottom line. Power range from 100mW to 200kW, voltage range from 60V to 500kV. You can purchase multiple varieties and specifications in one-stop from us. We have a high-voltage power supply research and development team, high-voltage power supply development software and software for testing high voltage insulation technology and zero current resonance technology, making our high voltage power supplies maintain high stability, low ripple, excellent in EMC. Our products are compact, highly efficient with a long operating life.
Wisman high voltage power supplies are competitively priced and a great idea for OEM customers.