Home>Product Center>X-ray Generator

X-ray Generator

  • title
    Contact Us
    Address:Rm. 2-20901, Tsinghua Science Park, Technology Road 65, High-tech District, Xi'an, Shaanxi Province, China, 710075
    Tel:86-029-8844 4525
    86-029-8868 8901
    Fax:86-029-8868 8683

    XRC Series X Ray Generator

    Maximum output voltage(KV):10,15,20,30,40,50,60,70


    1. Power factor corrected  input 86Vac~265Vac

    2. Models from 10KV to 70kV, 120W

    3. Integrated Filament Supply 3.5A@5.5Vdc

    4. low output ripple and noise <0.1%p-p

    5. high stability 0.02%/8 hour

    6. low temperature coefficient 25ppm/℃

    7. Optional Ethernet, RS-232, RS485 Digital Interfaces

    8. Overvoltage, Arc and short circuit Protected

    9. Voltage and current adjustment function

    10. Local or remote control, or digital control

    11. Safety interlock function

    12. OEM customization available


Product introduction



Wisman's XRC series x-ray generator is designed for AC wide voltage ranges from 86Vac~ 256Vac high voltage modules,which is with the function of power factor correction. Wisman's XRC series x-ray generator is specialized for all kinds of x-ray tubes, incorporate a filament supply providing regulated DC current adjustable between 0.3A to 3A at 5.5V. High voltage and filament current can be linearly ramped up. 

Wisman's XRC series x-ray generator can realize remote control of the output voltage and current via connecting a potentiometer, with the function of voltage and current monitor, overvoltage protection, arc, short circuit and safety interlock protection. XRC series x-ray generator is the best choice for OEM customers, with the interface of RS232 and RS485 optional.


Plastics Sorting,
Crystal Inspection
Plating Measurement
Diamond Inspection
Mineral Analysis
X-Ray Fluorescence
X-Ray Diffraction

Input Voltage: 86-264Vac, 47-63 Hertz, for 120 watt units
Output Voltage:10KV,15KV,20kV, 30kV, 40kV, 50kV, 60kV and 70kV  etc
Output Polarity: Positive-for ground referenced filament X-ray tubes
Power: 120 watts .
Voltage cotrolling:

Output Voltage Regulation:
≤0.01% of rated output voltage over specified input voltage range
≤0.01% of rated output voltage for a full load change
Emission Current Regulation:
≤0.01% of rated output current over specified input voltage range
≤0.01% of rated output current for a change from 30% to 100% of rated output voltage
Ripple: ≤1%rms at >20 kHz, 0.1%rms below 20 kHz
Stability: ≤25ppm/hr after a 2 hour warm up
Filament Configuration:
Closed loop emission control regulates filament setting to provide desired Xray tube emission current.

Filament is disabled when output voltage  is <30% of full scale output.
Filament Output: 0-5 amps at a compliance of 10 volts, maximum.
Other filament levels available on special order.
Temperature Coefficient: ≤50ppm per degree C
Temperature : Range:Operating: 0℃ to 40℃; Storage: -40℃ to 85℃
Humidity:20% to 85% RH, non-condensing.
Local: Internal multi-turn potentiometer to set voltage from 0to full output voltage.
Remote: 0 to +10Vdc proportional from 0 to full output voltage.
Accuracy: ±1%. ZIN: 10Mohm.
Emission Control:
Local: Internal potentiometer to set beam current between 0 and full output.
Remote: 0 to +10Vdc proportional from 0 to full output current.
Accuracy : ±1%. ZIN: 10Mohm.
Voltage and Current Monitors:
0 to +10Vdc proportional from 0 to rated output. Accuracy ±1%.
Input Line Connector: IEC 320 with EMI filter
Output Line Connector:
Depends upon polarity selected. See table and drawing.
Other connectors and pinouts available on special order.
Remote Monitor:USB and RS-232、RS-485 are standard. All
digital monitors have an accuracy specification of 2%.
Control Software: A Windows graphical user interface example is provided. built-in diagnostics can be performed over USB and RS232  RS-485.   
High Voltage Enable A hardware based,dry contact closure will enable the power supply into the high voltage on mode. 
Monitor Signals: Test points are made available at J2 for monitoring voltage and current outputs. The output polarity is positive from 0 to 10V equal to 0 to 100% of the output.

        10KV-50KV,120W:L92mm   W127mm    H230mm  3.5kg
        60KV-70KV,120W:L92mm   W127mm    H180mm   4.5kg

For more details, please click the PDF button to download the PDF file for viewing...


For information concerning our high voltage products, please call at 086-029-33693480 or visit our website www.wismanhv.com

Wisman advances medical care, industrial processes, quality control, scientific research, security and telecommunications by providing innovative high voltage power supplies including micro-modules high voltage power supply, modules high voltage power supply, X-ray generator, rack mount voltage power supply, special customized high voltage power supply, high voltage accessories, etc. that enable equipment manufacturers to improve their systems’ performance, reliability, cost and bottom line. Power range from 100mW to 200kW, voltage range from 60V to 500kV. You can purchase multiple varieties and specifications in one-stop from us. We have a high-voltage power supply research and development team, high-voltage power supply development software and software for testing high voltage insulation technology and zero current resonance technology, making our high voltage power supplies maintain high stability, low ripple, excellent in EMC. Our products are compact, highly efficient with a long operating life.

Wisman high voltage power supplies are competitively priced and a great idea for OEM customers.

< Back Home