INTRODUCTION:

SDF is one power supply not two.The upper and lower layers cannot be separated. Although the SDF series is one power supply, it can be used as three power supplies.

One Wisman SDF can be used as three. Both positive voltage 4KW and negative voltage 4KW can be used alone,and positive and negative synchronous output can also be used as 8KW. Wisman's has the unique function with positive and negative synchronization, remote optical fiber communication anti-interference.
Wisman’s SDF series are high-performance 19' standard rack-mounted high-voltage power supplies. It has a complete protection system and can be controlled remotely or locally. The front panel has voltage and current display, high-voltage output terminal has the over-voltage, over-current, short-circuit protection, arcing, over-temperature protection and safety interlocking functions. With wide range of adjustments and flexible multiple optional functions.

Application:

Ion implantation

Capacitor charging

Pulse power

Accelerator

Electron beam power supply

Ion beam power supply

High-energy particle injection

X-ray tube

Electron beam welding machine

Semiconductor industry

Electron beam system

Ion beam system

X-ray equipment

Laser

High voltage pulse generator bias

High voltage amplifier bias

Electrostatic precipitation

Chemical purification

Ion implantation

Ion vapor deposition

Chemical vapor deposition

Electron beam welding

Electron gun

High voltage testing

Particle accelerator

Industrial equipment

Electronic components aging

Insulation testing

Ion implantation

Electrostatic application

Scientific research.

SPECIFICATION:

The maximum output power of a single machine is 8KW
Output: 2KV, 4KV, 6KV, 8KV, 12KV, 16KV, 20KV, 24KV, 30KV, 40KV, 80KV, 100KV, 140KV, 160KV etc, 0V to the full.
Voltage control:

Internal: the multi-turn potentiometer can set the output voltage from 0V to full.
External remote control: external 0 to 10V control signal can adjust the output from 0V to full.
Current control:

Internal:the multi-turn potentiometer can set the current from 0 to full.
External remote control: external 0 to 10V control signal can transfer the current set from 0 to full.
Voltage regulation:
Relative load: 0.005%+5000mV (no load to rated load)
Relative input: ±0.005%+500mV (input voltage change is ±10%)
Current regulation:
Relative load: 0.01%±100uA (no load to rated load)
Relative input: ±0.005% (input voltage change ±10%).
Ripple voltage: 0.1% P-P +1Vrms.
Temperature coefficient: 25ppm, higher temperature coefficient can be customized.
Stability: less than 100ppm per hour after starting on for half an hour.
Environmental temperature: 0 to +50°C.
Storage temperature: -40℃ to +85℃.
Voltage and current indication: 4-digit digital panel meter with an accuracy of 1% under rated output conditions.
Dimensions:
40-70KV height 308mm (7U) width 483mm, length 483mm,
80-160KV height 308mm (7U) width 483mm, length 610mm,
Connector:
High-voltage output connector: The recessed insulating conduit and the high-voltage cable protruding in are connected by a metal connector. The standard high-voltage cable is 1 meter.
Input and output connector: DB50, including control and display signals.
Remote control of output voltage and current:
An external potentiometer can be used to control the output voltage and current remotely via using the 10V voltage reference inside the power supply.
Remote voltage and current indication: JP1 contains 0 to 10V voltage and current indication signals, which can be connected to various digital or pointer meters.

For more details, please click the PDF button to download the PDF file for viewing...

For information concerning our high voltage products, please call at 086-029-33693480 or visit our website www.wsmhv.com

Wisman advances medical care, industrial processes, quality control, scientific research, security and telecommunications by providing innovative high voltage power supplies including micro-modules high voltage power supply, modules high voltage power supply, X-ray generator, rack mount voltage power supply, special customized high voltage power supply, high voltage accessories, etc. that enable equipment manufacturers to improve their systems’ performance, reliability, cost and bottom line. Power range from 100mW to 200kW, voltage range from 60V to 500kV. The application fields of Wisman products cover medical, industrial, semiconductor, safety, environment, analytical instruments, scientific research and other fields. You can purchase a variety of specifications in one-stop high-voltage power supplies from Wisman. We have a high-voltage power supply research and development team, high-voltage power supply development software and software for testing high voltage insulation technology and zero current resonance technology, making our high voltage power supplies maintain high stability, low ripple, excellent in EMC. Our products are compact, highly efficient with a long operating life.

Wisman high voltage power supplies are competitively priced and a great idea for OEM customers.