Wisman MS series is a high-performance 19' standard rack-mounted 10-channel output high-voltage power supply, 10-channel independent switch, 10-channel independent control, 10-channel independent display, 10-channel voltage and current independent display, 4-digit display. and the output voltage and current of each channel can be the same, can also be different, customers order according to their needs. It is suitable for fast recovery of ignition in severe occasions such as accelerator and ion beam implantation. The output starts from 0, and the indicators below 5% of the rated output drop slightly. The MS series has a complete protection system. It can be controlled remotely or locally, with voltage and current display on the front panel, over-voltage, over-current, short-circuit protection, arc-pulling, over-temperature protection and safety interlock at the high-voltage output end. Wide range of adjustment and flexible multiple optional functions.

1. AC/DC output voltage up to 70KV, output power 2000W

2. Ripple voltage: 0.1% P-P (lower ripple can be customized) Temperature coefficient: ≤25ppm/℃

3. Stability: less than 100ppm every 1 hour after starting for half an hour, less than 500ppm every 8 hours

4.10 independent outputs, independent control, independent display

5. Standard RS-485 computer remote control

6. It can be controlled and displayed on the front panel, and can be remotely controlled by a computer

7. AC220V power supply

8. Overvoltage, arcing and output short circuit protection

9. Voltage and current regulation function

10. OEM customization available 

11. High stability, low ripple

Typical applications: 

Ion implantation, Accelerator, Capacitor charging, Electron beam power supply, Ion beam power supply, High-energy particle implantation, X-ray tube, Electrostatic oiling, Electrostatic spinning, Electrostatic spraying, Electrostatic flocking, Air purification, Electrostatic fume removal, Static electricity Dust removal, Industrial equipment, Aging of electronic components, Insulation testing, Ion implantation, Electrostatic applications, Lasers, Scientific research.

Feature Description:

Ripple voltage: 0.1% P-P (customizable lower ripple)

Temperature coefficient: ≤25ppm/℃, higher temperature coefficient can be customized.

Stability: less than 100ppm every 1 hour after starting for half an hour, and less than 500ppm every 8 hours.

Input: AC220±10%, (AC110V optional) maximum current 10A. Efficiency: 85%, power factor 0.995

Output: 1KV, 2KV, 3KV, 6KV, 8KV, 10KV, 15KV, 20KV, 30KV, 40KV, 50KV, 60KV, 70KV and other highest voltage output options, 0V to the highest voltage adjustable.

Output power: 10W, 30W, 60W, 100W, 150W, 300W, 600W, 1200W, 2000W

Voltage Control:

Inside the power supply: The multi-turn potentiometer that comes with the power supply can set the output voltage between 0V and the highest voltage.

External remote control: The computer RS-485 communication can adjust the output from 0V to the highest output voltage.

Current Control:

Inside the power supply: The multi-turn potentiometer that comes with the power supply can set the current from 0 to the highest current.

External remote control: computer RS-485 communication can set the current from 0 to the highest current.

Voltage Regulation:

Relative load: 0.01%+500mV (no load to rated load)

Relative input: ±0.01%+500mV (input voltage change is ±10%)

Current regulation rate:

Relative load: 0.1%±100uA (no load to rated load)

Relative input: ±0.005% (input voltage change ±10%).

Ambient temperature: 0 to +50°C.

Storage temperature: -40°C to +85°C.

Voltage and current indication: 4-digit digital panel meter, the accuracy is 1% under rated output conditions.

Dimensions:

Height 266mm (6U) width 483mm, length 610mm.

Connector:

High-voltage output connector: The recessed insulating conduit and the probing high-voltage cable are connected by metal connectors.

For information concerning our high voltage products, please call at 086-029-33693480 or visit our website www.wsmhv.com.

Wisman advances medical care, industrial processes, quality control, scientific research, security and telecommunications by providing innovative high voltage power supplies including micro-modules high voltage power supply, modules high voltage power supply, X-ray generator, rack mount voltage power supply, special customized high voltage power supply, high voltage accessories, etc. that enable equipment manufacturers to improve their systems’ performance, reliability, cost and bottom line. Power range from 100mW to 200kW, voltage range from 60V to 500kV. You can purchase multiple varieties and specifications in one-stop from us.

Wisman have a high-voltage power supply research and development team, high-voltage power supply development software and software for testing high voltage insulation technology and zero current resonance technology, making our high voltage power supplies maintain high stability, low ripple, excellent in EMC. Our products are compact, highly efficient with a long operating life.

Wisman high voltage power supplies are competitively priced and a great idea for OEM customers.